Pilot 2WD V6-3.5L (2006)
4
Reconnect the 14P connector to the daytime running lights control unit and make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 5.
5. Disconnect the 14P connector from the daytime running lights control unit, and make these tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the control unit must be faulty; replace it.