Pilot 2WD V6-3.5L (2006)
Air Bag: Service and Repair
Side Airbag Replacement
Side Airbag Replacement
NOTE: Review the seat replacement procedure before doing repairs or service.
Removal
1. Slide the seat all the way to the center.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Disconnect the side airbag harness 2P connectors (A).
4. Remove the front seat assembly and front seat-back cover.
5. Remove the mounting nuts (A) and the side airbag (B).
Installation
NOTE:
-
If the side airbag lid is secured by a tape, remove the tape.
-
Do not open the lid of the side airbag cover.
-
Use new mounting nuts tightened to the specified torque.
-
Make sure that the seat-back cover is installed properly. Improper installation may prevent proper deployment.
-
Be sure to install the harness wires so that they are not pinched or interfering with other parts.