Pilot 2WD V6-3.5L (2006)
1. Place the new side airbag on the seat-back frame (A). Tighten the side airbag mounting nuts (B).
2. Install the front seat-back cover.
3. Install the front seat assembly, then connect the side airbag harness 2P connector.
4. Reconnect the negative cable to the battery.
5. Move the front seat and the seat-back through their full ranges of movement, making sure the harness wires are not pinched or interfering with
other parts.
6. After installing the side airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6
seconds and then go off.
