Pilot 2WD V6-3.5L (2006)
8. Disconnect the dashboard wire harness A 4P connector (A) from the cable reel 4P connector (B).
9. Disconnect the dashboard wire harness B 5P connector (A), and release the tab (B), then pull off the cable reel (C).
Installation
1. Before installing the steering wheel, align the front wheels straight ahead.
2. If not already done, disconnect the battery negative cable, and wait at least 3 minutes.
3. Set the turn signal canceling sleeve (A) so the projections (B) are aligned vertically.
