Pilot 2WD V6-3.5L (2006)
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals. There should be continuity between the No. 1 and No. 2 terminals when the door lock knob switch is
in the UNLOCK position and no continuity when it is in the LOCK position.
4. If the continuity is not as specified, replace the door lock actuator.
Right Rear Door (EX and EXL)
1. Remove the right rear door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals. There should be continuity between the No.2 and No.3 terminals when the door lock knob switch is in
the UNLOCK position and no continuity when it is in the LOCK position.
4. If the continuity is not as specified, replace the door lock actuator.
