Pilot 2WD V6-3.5L (2006)
Sunroof / Moonroof Switch: Testing and Inspection
Switch Test
NOTE: The moonroof can still be operated for about 10 minutes after the ignition switch is turned from the "II" to the "I" or "O" positions, as long as
none of the doors are opened. This provides a convenience to parked occupants while offering a degree of security against unwanted or accidental moon
roof operation.
1. Remove the switch panel (A).
2. Carefully push out the moonroof switch (B) from behind the dashboard lower cover, then disconnect the 6P connector (C) from the switch.
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, replace the bulb (D) or the switch.