Pilot 2WD V6-3.5L (2006)
Trunk / Liftgate Switch: Testing and Inspection
Tailgate Latch Switch Test
1. Open the tailgate.
2. Remove the tailgate trim panel.
3. Disconnect the 2P connector from the tailgate latch.
4. Check for continuity between the No. 1 and No. 2 terminals.
-
With the tailgate open, there should be continuity.
-
With the tailgate closed, there should be no continuity.
5. If the continuity is not as specified, replace the tailgate latch switch.
