Pilot 2WD V6-3.5L (2006)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
ECT Sensor 2 Replacement
ECT Sensor 2 Replacement
1. Drain the engine coolant.
2. Remove intake manifold cover.
3. Disconnect ECT sensor 2 2P connector (A).
4. Remove ECT sensor 2 (B).
5. Install the sensor in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant, and bleed air from the cooling
system with the heater valve open.
