Pilot 2WD V6-3.5L (2006)
14. Check for continuity between the No. 41 terminal of PCM connector A (44P) and No. 2 terminal of the A/C pressure switch 2P connector.
Is there continuity?
YES - Check for loose wires or poor connections at the PCM connector A (44P). If the connections are good, substitute a known-good PCM, and
recheck. If the symptom/indication goes away, replace the original PCM, then perform the PCM idle learn procedure in Computers and Control
Systems.
NO - Repair open in the wire between the PCM and the A/C pressure switch.
15. Check for proper A/C system pressure.
Is the pressure within specifications?
YES - Replace the A/C pressure switch.
NO - Repair the A/C pressure problem.