Pilot 2WD V6-3.5L (2006)
Alternator: Service and Repair
Removal and Installation
Alternator Removal and Installation
Removal
1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the customer's audio presets.
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
3. Remove the intake manifold cover.
4. Remove the drive belt.
5. Remove the harness clamp (A), then remove the bracket (B).
6. Disconnect the alternator connector (C) and the BLK wire (D) from the alternator.
7. Remove the mounting bolt (A) and alternator bracket mounting bolt (B), then remove the alternator.
Installation