Pilot 2WD V6-3.5L (2006)
1. Install the alternator.
2. Connect the alternator connector (A) and the BLK wire (B) to the alternator.
3. Install the bracket (C), then install the harness clamp (D).
4. Install the drive belt.
5. Install the intake manifold cover.
6. Connect the positive cable to the battery first, then connect the negative cable.
7. Enter the anti-theft codes for the radio and the navigation system, then enter the customer's audio presets.
8. Do the power window control unit reset procedure.
9. Set the clock.
