Pilot 2WD V6-3.5L (2006)
2.
Remove the screws, bolts, and clips, then remove the front inner fender.
3.
Reinstall the wheel, then lower the vehicle. Park the vehicle outside.
4.
Use a hose to run a lot of water onto the cowling near the side with the leak. Make sure you can see water running onto the wire harness in the
fenderwell area.
5.
Check for water dripping into the passenger compartment.
^
If water appears to be entering the passenger compartment from the wire harness, go to REPAIR PROCEDURE.
^
If the water appears to be coming from somewhere else, continue with normal water leak troubleshooting.
REPAIR PROCEDURE
