honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Steering Pump|Service and Repair > < Pump Pressure Test With T/N 07406-001000A|Page 6126
Page 2
background image

NOTICE:  Do not keep the shut-off valve closed more than 5 seconds or the pump could be damaged by over-heating.

11. Immediately open the shut-off valve fully. If the pump is in good condition, the gauge should read at least 8,300 - 8,800 kPa (85 - 90 kgf/cm2,

1,210 - 1,280 psi). A low reading means pump output is too low for full assist. Repair or replace the pump.

Power Steering Pump|Service and Repair > < Pump Pressure Test With T/N 07406-001000A|Page 6126