Pilot 2WD V6-3.5L (2006)
Then remove the tire from the wheel.
6. Remove and discard the valve stem nut, then remove the tire pressure sensor and the valve stem from the wheel. Never reuse the valve stem nut; it's a
one-shot item that must be replaced. If the valve stem nut is seized on the valve stem and won't budge, go to step 7.
Otherwise, go to step 9.
7. Slowly turn the valve stem counterclockwise until the tire pressure sensor drops off the end of the valve stem. Discard the screw, but keep the sensor.
Also, make sure the valve stem grommet is removed; sometimes it gets stuck in the wheel.