Pilot 2WD V6-3.5L (2006)
Drive/Propeller Shafts, Bearings and Joints: Service and Repair
Propeller Shaft Installation
Propeller Shaft Installation
1. If you are installing a new propeller shaft, go to step 2. If you reinstalling the original propeller shaft, go to step 3.
2. Install the new propeller shaft (A) onto the rear differential (B), by aligning the reference mark (C) on the new propeller shaft with the factory
reference mark (D) on the companion flange (E). Do not use the marks you made on the companion flange during the removal procedure. If there
are no factory marks on the companion flange, go to step 4.
3. Reinstall the propeller shaft (A) to the rear differential (B) by aligning the reference marks (C) you made during the removal procedure.
4. Attach the propeller shaft to the rear differential with new mounting bolts. Tighten the bolts to the specified torque.
5. Install the center support bearing bolts (A). Make sure you use new bolts. Then install the propeller shaft protector (B).