Pilot 2WD V6-3.5L (2006)
Axle Shaft Assembly: Service and Repair
Intermediate Shaft
Removal
Intermediate Shaft Removal
1. Drain the transmission fluid.
2. Remove the right driveshaft.
3. Remove the subframe stiffener.
4. Remove the exhaust pipe A.
5. Remove the exhaust pipe bracket (A), flange bolt (B), and two dowel bolts (C).
6. Remove the intermediate shaft (D) from the differential. Hold the intermediate shaft horizontally until it is clear of the differential to prevent
damage to the differential oil seal.
Disassembly
Intermediate Shaft Disassembly
Special Tools Required
^
Driver 07749-0010000
^
Support base attachment 07LAF-SM40300
^
Support base 07965-SD90100
^
Attachment, 42 x 47 mm 07746-0010300
1. Remove the heat shield.
