Pilot 2WD V6-3.5L (2006)
Fluid Pressure Sensor/Switch: Service and Repair
3rd Clutch Transmission Fluid Pressure Switch Replacement
3rd Clutch Transmission Fluid Pressure Switch Replacement
1. Remove the splash shield.
2. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A).
3. Make sure there is no water, oil, dust, or foreign particles inside the connector.
4. Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
5. Connect the connector securely.
6. Install the splash shield.
