Pilot 2WD V6-3.5L (2006)
4. Reconnect the connector to the control unit, and make these input tests at the connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 5,
5. Disconnect the 18P connector from the power window control unit, then make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the control unit must be faulty; replace it.
Control Unit Input Test
Control Unit Input Test
Passenger's Unit
1. Before testing the power window control functions, troubleshoot the multiplex control system.
2. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box, and disconnect its connector.
