Pilot 4WD V6-3.5L (2008)
-
Replace the upper clip with a new one because it was damaged.
7. Before installing the A-pillar trim (A), carefully remove the upper clip (B).
8. Check the overlap between the headliner and A-pillar trim, and if necessary, adjust it.
9. Carefully reinstall the upper clip (A) to the A-pillar trim (B), Be sure that the grommet (C) is nearest to the top of the pin (D) as shown.
10. Reinstall the A-pillar trim (A).
1. Insert the bottom of the trim into the dashboard (B).