Pilot 4WD V6-3.5L (2008)
13. Remove the harness clamp (B) from the harness cover/clamp bracket (C), disconnect the 4th clutch transmission fluid pressure switch connector
(D), then remove the harness cover from the bracket.
14. Disconnect the A/T clutch pressure control solenoid valve A connector (E), A/T clutch pressure control solenoid valve B connector (F), solenoid
harness connector, transmission range switch connector, ATF temperature sensor connector, output shaft (countershaft) speed sensor connector,
input shaft (mainshaft) speed sensor connector, and 3rd clutch transmission fluid pressure switch connector.
15. Remove A/T clutch pressure control solenoid valves A and B, ATF pipes (C), and gasket (D).
16. Replace the gasket and O-rings (E) with new ones when installing A/T clutch pressure control solenoid valves A and B.
17. Remove the solenoid valve cover (A), dowel pins (B), and gasket (C).
18. Replace the gasket with a new one when installing the solenoid cover.
19. Disconnect shift solenoid valve A connector (A), shift solenoid valve B connector (B), shift solenoid valve C connector (C), and torque converter
clutch solenoid valve connector (D).
