Prelude L4-1829cc 1800 ES,ET (1983)
Fuel Shut-off Solenoid Relay: Testing and Inspection
Fuel Cut-Off Relay
1.
With ignition switch off, reach behind fuse box and remove the fuel pump cut-off relay.
2.
Connect positive probe of voltmeter to the Black/Yellow terminal at the fuel pump cut-off relay connector (from the ignition switch) and negative
probe to ground. Turn the ignition on and check for battery voltage.
^
If no voltage is indicated, check fuse and wiring between relay and ignition switch.
^
If voltage is indicated, proceed to step 3.
Relay Voltage Check
3.
Connect positive probe of voltmeter to the Blue terminal at fuel pump cut-off relay connector and negative probe to ground. Turn the ignition on
and check for battery voltage.
^
If no voltage is indicated, check blue wire circuit between connector and ignition coil negative terminal.
^
If voltage is indicated, proceed to step 4.