Prelude L4-1955cc 2000 (1987)
Air Door Cable: Adjustments
Air Mix Cable
Fig. 19 Air mix cable adjustment.
1.
Disconnect cable from air mix arm on heater housing and place temperature control lever in HOT position.
2.
Fully open air mix door in front of heater core and connect cable end to control lever, Fig. 19.
3.
Hold air mix door open, pull cable housing away from air mix lever just enough to remove slack from cable but not enough to move temperature
lever, then snap housing into clamp.
4.
Check operation of air mix door and water valve, and adjust water valve cable as needed.
