honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Instruments - Vibrating Speedometer Needle|Page 2337 > < Blower Motor Relay|Testing and Inspection
Page 1
background image

Blower Motor Resistor: Customer Interest
Instruments - Vibrating Speedometer Needle

Model

PRELUDE Si
Applicable To

ALL '85-86 '87 up to VIN. . .005412
File Under

ELECTRICAL
Bulletin No.

87-003
Issue Date JAN 23, '87
Vibrating Speedometer Needle

PROBLEM

The speedometer needle vibrates when the heater blower is used at approximately one quarter speed.

PROBABLE CAUSE

Electrical interference from the heater blower power transistor.

CORRECTIVE ACTION

1.

Remove the glove box.

2.

Loosen the blower/evaporator sealing band and slide it towards the evaporator.

3.

Disconnect the wire connector and vacuum hose from the blower.

4.

Remove the three mounting bolts from the blower and lower the blower to the floor.

5.

Replace the power transistor with the new type listed under Parts Information.

6.

Reinstall the blower, making sure there is no air leakage from the sealing band.

PARTS INFORMATION

Power transistor H/C 1466051 P/N 39473-SBO-003

WARRANTY CLAIM INFORMATION

Operation number:

612130

Flat rate time:

0.6 hour

Failed part H/C: 146605

Instruments - Vibrating Speedometer Needle|Page 2337 > < Blower Motor Relay|Testing and Inspection