1987 Prelude L4-1955cc 2000 Evaporator Core: Removal and Installation
Evaporator Core: Service and Repair
Removal and Installation
Evaporator Replacement
1. Disconnect the battery negative terminal.
2. Discharge the refrigerant.
3. Disconnect the receiver line and suction hose from the evaporator.
CAUTION: Cap the open fittings immediately to keep moisture and dirt out of the system.
4. Remove the grommets.
5. Remove both lower dash panels.
6. Disconnect the vacuum line and wire harness from the blower.
7. Remove the sealing band from between the blower and evaporator.
8. Remove the blower.