Prelude L4-1958cc DOHC (1989)
Replace the forward caliper slide pin and the pad spring on each rear caliper with the parts from the kit listed under PARTS INFORMATION.
1.
Raise the car, and remove the rear wheels.
2.
Remove the two caliper mounting bolts, then remove the caliper from the caliper bracket. Suspend the caliper with a piece of wire so as not to
strain the brake hose.
3.
Remove the forward (black) caliper slide pin from the caliper bracket. Apply the grease (provided in the kit) to the new pin, then install it in the
bracket.
4.
Reassemble the caliper with the new pad spring from the kit, then reinstall the caliper on the caliper bracket.
5.
Repeat steps 2-4 on the other rear caliper, then reinstall the rear wheels.
