honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Preliminary Checks|Page 690 > < Preliminary Checks|Page 688
Page 8
background image

30.  Steering wheel off to left: face the inside of the left front wheel and turn the left tie-rod clockwise; then face the inside of the right front wheel and

turn the right tie-rod shaft counterclockwise. 
Each tie-rod shaft should be turned an equal amount.

Steering wheel off to right: face the inside of the right front wheel and turn the right tie-rod shaft clockwise; then face the inside of the left front
wheel and turn the left tie-rod shaft counterclockwise. 
Each tie-rod shaft should be turned an equal amount.

31.  After adjustment, tighten the tie-rod shaft locknuts and reposition the tie-rod boots if necessary.
32.  Drive the car in a straight line on a flat road and recheck the final steering wheel alignment.

Preliminary Checks|Page 690 > < Preliminary Checks|Page 688