Prelude L4-1958cc DOHC (1989)
Alignment: Service and Repair
Rear Wheel Angle Inspection (4WS)
Rear Wheel Angle Inspection (4WS)
1. Set the turning radius gauges at the rear wheels.
2. Apply the brake and turn the steering wheel 127° to right.
Check the rear wheel.
Turning angle: 1° 30' ± 30'
3. Turn the steering back to center, apply the brake and turn the steering wheel 127° to the left.
Check the rear wheel turning angle again: 1° 30' ± 30'
4. Apply the brake and turn the steering wheel right and left to full lock.
5. At both left and right full lock, the rear wheel max turning angle should be:
Wheel pointing inward : 5° 0' ± 1°
Wheel pointing outward : 5° 20' ± 1°
6. If not as specified, see Alignment.
If not correctable by re-alignment, the rear steering gearbox may need to be replaced.