Prelude L4-1958cc DOHC (1989)
Heated Oxygen Sensor: Description and Operation
Fig. 81 Oxygen Sensor And Output Chart
An oxygen (Lambda) sensor is used to provide more precise control of air/fuel mixtures. This system operates by measuring oxygen content in
exhaust gasses, as the amount of oxygen remaining in the exhaust gases is directly proportional to the air/fuel ratio of mixtures entering the engine.
The oxygen sensor is made of a ceramic material called zirconium dioxide. The inner and outer surfaces of the ceramic material are coated with
a very thin layer of platinum. The outer surface is exposed to the exhaust gasses, while the inner surface is exposed to the outside air.
The difference in the amount of oxygen contacting the inner and outer surfaces of the oxygen sensor creates a pressure differential which results
in a voltage signal being generated. The amount of voltage produced is determined by the air/fuel mixture, A high voltage indicates a rich mixture,
and a low voltage indicates a lean mixture.
The oxygen sensors are installed on the exhaust manifold.
