Prelude L4-1958cc DOHC (1989)
5. Use the arrow or number keys to select the location of the battery, either OUT OF VEHICLE or IN VEHICLE, then press Enter.
6. Use the arrow or number keys to select FLOODED, then press Enter.
NOTE:
All Honda original equipment and replacement batteries are flooded types. If you select another battery type, your claim will not be covered by
Honda's warranty.
7. Use the arrow or number keys to select the battery CCA value, then press Enter. You can find the CCA on the battery label on the top of the battery.
If the battery hold-down plate is covering the label, loosen the plate and shift it out of the way to read the CCA.
NOTE:
Enter the correct cold cranking amps. If you enter the wrong number, the ED-18 analyzer result may be wrong, and the warranty claim may be
rejected.
8. Measure the battery temperature by placing the analyzer's IR temperature sensor within 1 to 2 inches of the top or side of the battery. (The arrow on
