Prelude L4-1958cc DOHC (1989)
12. Adjust the camber by loosening the upper arm lock nut and moving the knuckle/hub assembly.
Rear Camber:
13. Read the rear camber on the gauge with the bubble at the center of the gauge.
Rear Camber: 0° 20' ± 1°
14. Adjust the rear camber by loosening the upper arm lock nuts and moving the knuckle/hub assembly.
Toe:
15. Check the rear toe-in.
Right Rear: 1 mm
Left Rear: 1 mm
Total : 2 ± 2 mm
NOTE: Left and right toe should be the same.
^ If adjustment is required, go to step 16.
^ If no adjustment is required, proceed to step 19.