Prelude L4-1958cc SOHC (1988)
CORRECTIVE ACTION B
Outer and Inner Wheel Housing Seam
1.
Remove the protective rubber seal from the outer and inner wheel housing seam.
2.
Clean the seam area so it's free of any dirt.
3.
Apply a bead of 3M Flexiclear Body Sealer (P/N 08405) along the seam.
4.
After the sealer has dried, reinstall the protective rubber seal.
Rear Wheel Housing and Damper Unit Seam
5.
Clean the rear wheel housing and damper unit seal area so its free of any dirt.
6.
Apply a bead of 3M Flexiclear Body Sealer (P/N 08405) around the seam.