Prelude L4-1958cc SOHC (1988)
Rear Fender and Panel Seam
6.
Remove the 6 plastic snaps from the rear wheel housing lining and the first 2 screws from the rear panel garnish.
7.
From the trunk side, clean the rear fender and panel seam area with alcohol; then apply a bead of 3M Flexiclear Body Sealer (P/N 08405) to the
seam.
Note:
make sure the seam is completely filled and sealer overlaps (about 1 cm) onto the rear fender and panel.
8.
Repeat the procedure on the other side.