Prelude L4-1958cc SOHC (1988)
Water Pump: Service and Repair
Water Pump Assembly - Exploded View
1.
Remove Timing Belt, refer to Engine/Timing Components/Timing Belt.
2.
Remove thermostat housing and water pump inlet pipe.
3.
Remove alternator bracket.
4.
Remove the water pump and O-ring.
5.
Replace all gaskets and O-rings when installing water pump.
6.
Reverse procedure to install.
NOTE: When refilling cooling system, loosen bleed bolt on heater valve or water outlet, as equipped, and allow coolant to flow out until stream
is free from bubbles.