honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Recall - Power Steering Hose Replacement|Page 577 > < Fuel Pressure Release|Service and Repair
Page 1
background image

Technical Service Bulletin # 88014

Date: 880610

Recall - Power Steering Hose Replacement

Model

Applicable To

File Under

See VIN range

88 PRELUDE

under Affected

STEERING

Vehicles

Bulletin No. 88-014

Issue Date JUN 10, '88
RECALL:

1988 Prelude Power Steering Supply Hose (Supersedes 88-014, dated APR 20, '88)

PROBLEM

When subjected to prolonged vibration and high underhood temperatures, the power steering supply hose, at the connector clamp seal, could develop a
small fluid leak. If the fluid contacts the hot exhaust manifold cover, it may cause smoke and there is a very remote possibility of fire if the fluid contacts
the exhaust manifold itself.

AFFECTED VEHICLES

1988 Prelude Si through BA4 . . . 066463 1988 Prelude S through BA4 . . . 066252

CORRECTIVE ACTION

Check for a recall completion mark above the sixth digit of the VIN on the firewall.
^

If there is a recall completion mark, you need do nothing.

^

If there is no recall completion mark, proceed to the removal and replacement instructions.

SI Model

Removing Power Steering Supply Hose:

1.

Place the vehicle on a lift.

2.

Open the hood and remove the negative battery terminal lead. (Use fender covers.)

3.

Remove the front air intake hose, the air intake tube, the front branch tube, the rear branch tube, and the air flow tube.

Recall - Power Steering Hose Replacement|Page 577 > < Fuel Pressure Release|Service and Repair