Prelude L4-1958cc SOHC (1988)
Front Camber
12 Return the front wheels to the straight-ahead position.
13.
Check the camber of each front wheel using the gauge.
Front camber:
0~ 00' +/- 1~.
14.
Adjust the camber, if necessary, by loosening the upper arm locknuts and moving the knuckle/ hub assembly.
Rear Camber
15.
Install the Rear Steering Center Lock Pin (T/N 07HAJ-SF1020A).
16.
Check the camber of each rear wheel using the camber gauge.
Rear camber:
-0~ 20' (negative) +/- E30'
NOTE:
The difference in camber between the right and left wheels should be less than 20'.
17.
Adjust the camber, if necessary, by loosening the upper arm locknuts and moving the knuckle/hub assembly.
Steering Wheel Alignment - Static (While the car is on the alignment rack)
18.
Check the steering wheel alignment. If it's off by more than 6~ (5 mm at the steering wheel hub), remove the steering wheel and reposition it on the
splines until it's within 6~.
19.
Remove the Rear Steering Center Lock Pin and reinstall the gearbox cap bolt.
20.
Turn the steering wheel until it is precisely centered in the straight-ahead position and secure it with a steering wheel holder.
