Prelude L4-1958cc SOHC (1988)
Fig. 9 Throttle control cable adjustment. 1984 Prelude
Fig. 10 Throttle control cable adjustment. Except 1984 Prelude
W/Carbureted Engine
1.
Ensure accelerator pedal adjustment and carburetor throttle cable play are correct.
2.
Run engine until it reaches operating temperature.
3.
Ensure idle speed, automatic choke operation, and distance between throttle control lever and throttle control bracket are correct.
4.
Attach a weight of approximately 3 lbs. to accelerator pedal, raise pedal, and release it.
5.
Secure throttle control cable as shown in Figs. 9 and 10.
6.
On 1984 models, remove hot air tube. On except 1984 models, remove air intake duct.
7.
On 1984 models, lay end of cable on emission control box. On except 1984 models, lay end of cable on shock tower.
8.
Rotate locknut (A) until distance between face of nut and end of cable is as shown in Figs. 9 and 10.