Prelude L4-1958cc SOHC (1988)
6.
Remove the reset buttons from the old clock case and install them into the new one.
7.
Install the circuit board and rear housing onto the new clock case. Slide the metal clips onto the rear housing, making sure the lock tabs "click"
into place.
8.
Reconnect the 4-P connector, then install the clock in the dashboard and set the time.
PARTS INFORMATION
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out-of-warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must request
consideration, and get the DSM's decision, before starting work.
Operation number:
733100
Flat rate time:
0.3 hour
Failed part:
P/N 39700-SF1-A01ZE
H/C 2985117
Defect code:
018
