Prelude L4-2.2L DOHC (VTEC) (1993)
NOTE:
-
Do not disconnect the P/S pipe and hose.
-
After installing, adjust the tension of the P/S pump belt.
4. Disconnect the alternator terminal and the connector, then remove the engine wire harness from the body side.
5. Loosen the alternator mounting bolt, nut and the adjusting nut, then remove the alternator belt.
NOTE: After installing, adjust the tension of the alternator belt.
6. Remove the cylinder head cover.
7. Remove the middle cover.
8. Remove the side engine mount.