honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

ABOUT US
Control Module, A/T > < Lock-Up Control Solenoid Valve A/B <--> [Torque Converter Clutch Solenoid, A/T]|Locations

Prelude L4-2.2L SOHC (1994)

Page 1
background image

Lock-Up Control Solenoid Valve A/B: Service and Repair

1. Remove the mounting bolts and lock-up control solenoid valve assembly.

NOTE: Be sure to remove or replace the lock-up control solenoid valves A and B as an assembly.

Lock-up Control Solenoid Valve A/B Replacement

2. Check the lock-up control solenoid valve oil passages for dust or dirt and replace as an assembly, if necessary.
3. Clean the mounting surface and oil passages of the lock-up control solenoid valve assembly and install a new filter/gasket.
4. Check the connector for rust, dirt or oil and reconnect it securely.

Control Module, A/T > < Lock-Up Control Solenoid Valve A/B <--> [Torque Converter Clutch Solenoid, A/T]|Locations