Prelude L4-2056cc DOHC (1990)
Brake Pad: Technical Service Bulletins
Brakes - Improved Front Pads
Bulletin No.
89-038
Issue Date
DEC 22, '89
Model
'88-90 PRELUDE
Applicable To
ALL
File Under
BRAKES
Replacement Front Brake Pads
Two types of front brake pad are available for 1988-90 Preludes. One type offers improved wear while the other is less likely to make noise. When
replacing front brake pads, install whichever brake pad suits the individual driver's needs.
^
The improved-wear brake pad is stamped with a manufacturer's ID number: JB KF50FE for Si and JB KF55FE for the S model.
^
The low-noise brake pad is stamped with a manufacturer's ID number: NS1 23 EE for both the Si and S models.
NOTE:
The surface finish of a used disc can cause noise with the low noise (NS1 23 EE) pad. Refinish each disc with the Kwik-Way Kwik Lathe and Power
Feed, or the Snap-On Front Disc Brake Lathe and Power Feed before installing the low noise-type pad.
Apply Molykote M77 thinly and evenly to the backs of the pads, and to the shims, without contaminating the friction material.
PARTS INFORMATION:
Improved wear front brake pads (JB KF50FE and JB KF55FE, original equipment on vehicles up to BA4 ... KC065626).
Si
P/N 45022-SD4-020
H/C 2985513
S
P/N 45022-SF1-017
H/C 3200573
Low-noise front brake pads (NS123 EE, original equipment on vehicles after BA4 ... KC06526).
Si
P/N 45022-SE0-G10
H/C 3411972
S
P/N 45022-SF1-305
H/C 3411964
WARRANTY CLAIM INFORMATION
In Warranty:
The normal warranty applies.
