Prelude L4-2056cc DOHC (1990)
Timing Marks For No. 2 Piston To TDC
8. Rotate crankshaft 180° counterclockwise to bring No.2 piston to top dead center. "UP" marks should be at intake side. Distributor rotor should
point to No.2 plug wire. Adjust valves on No.2 cylinder.
9. Using a new gasket, replace valve cover.
Torque: 7 ft.lbs (10 Nm)
Note: If crank pulley bolt broke loose while turning crank, retorque to 108 ft.lbs (150 Nm).