Prelude L4-2056cc DOHC (1990)
1.
Open glove box, then remove access panel from inside glove box.
2.
Disconnect connector between passenger airbag and SRS main harness, then install short connector on airbag side of connector Fig. 2.
3.
Remove tweeter cover from dashboard, then the visor black face panel.
4.
Remove glove box, the the airbag mounting screws.
5.
Remove airbag.
6.
Reverse procedure to install. Press airbag assembly downwards and turn adjusting nuts until they touch the lower part of airbag assembly.
