Prelude L4-2056cc DOHC (1990)
Seat Belt Reminder Lamp: Technical Service Bulletins
Seat Belt Reminder Cover - Removal Procedure
Prelude Seat Belt
Reminder Light Covers
Removing the seat belt beeper/reminder tight cover from an '88-90 Prelude without breaking it is tricky, but it can be done.
Slowly, gently pull the ftont of the cover away from the windshield, then down, while holding the rear edge up against the light assembly. (If the rear
edge comes down when you pull the front edge down, the rear clips will break.) Once the front clips are released, slide the cover toward the windshield
to release the rear clips.
NOTE:
If you're still unsuccessful (don't feet alone), the cover can be ordered separately.
