Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
11. Disconnector the connector, and detach the harness clip. Disconnect the rear lock rod, and detach the inner handle rod from the rod crank. Remove
the latch through the hole in the door.
NOTE: Take care not to bend any of the rods.
12. Remove the screws, then remove the lock knob, and detach the rod crank.
NOTE: Take care not to bend the front lock rod.
13. Installation is the reverse of the removal procedure.
NOTE:
-
Before reinstalling the glass, make sure the glass run channel la installed properly.