Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
Control Arm: Service and Repair
Rear Suspension
REMOVAL
CAUTION:
-
Replace the self-locking nuts after removal.
-
Be careful not to damage the ball joint boot.
NOTE: Rear upper arm mounting nut removal:
-
Front mounting nut: From inside of the vehicle; lower the rear seat-back, and remove the access cover and the front mounting nut.
-
Rear mounting nut: Front inside the trunk; pull the trunk side trim to one side. and remove the rear mounting nut.
INSTALLATION