Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
Fluid Pump: Testing and Inspection
1. Install the ATF pump gears and ATF pump driven gear shaft in the main valve body.
NOTE:
-
Lubricate all parts with ATF during inspection.
-
Install the ATF pump driven gear with its grooved and chamfered side facing up as shown.
2. Measure the side clearance of the ATF pump drive and driven gears.
-
ATF Pump Gears Side (Radial) Clearance: Standard (New):
ATF Pump Drive Gear 0.210-0.265 mm (0.0083-0.0104 inch).
ATF Pump Driven Gear 0.070-0.125 mm (0.0028-0.0049 inch).