Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
Shift Cable: Service and Repair
REPLACEMENT
WARNING:
-
Make sure lifts, jacks, and safety stands are placed properly.
-
Apply the parking brake, and block the rear wheels securely so vehicle will not roll off the stands and fall on you while working under it.
1. Shift the transmission into R.
2. Remove the center console.
3. Remove the nut securing the shift cable end, then separate the shift cable from the shift lever assembly.
4. Rotate the socket holder on the shift cable counterclockwise a quarter turn, then slide the holder to remove the shift cable from the shift lever
bracket base.
NOTE: Do not remove the shift cable by the shift cable guide pipe.
5. Remove the floor heat shield.