Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air. Blow out all passages.
-
Check all valves for free movement. If any fail to slide freely.
-
Replace the valve body as an assembly if any parts are worn or damaged.
-
Coat all parts with ATF during assembly.
-
Replace the CPC valve springs A and B. and the A/T clutch pressure control solenoid valve A/B assembly as a set, if replacement of either CPC
valve spring is required.
Accumulator Body