Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
_mfi/Page-1257003.png)
6. Press the intermediate shaft bearing out of the bearing support using the special tools and a press.
ASSEMBLE
CAUTION: Do not damage the lip on outer seal during installation.
NOTE:
-
Clean the disassembled parts with solvent, and dry them thoroughly with compressed air. Do not wash the rubber parts with solvent.
-
Be careful not to damage the bearing support rings on the intermediate shaft during reassembly.
-
Be careful not to damage the bearing support rings on the intermediate shaft during reassembly.
