Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
2. Inspect for runout.
-
Standard: 0.02 mm (0.0008 inch) max.
-
Service Limit: 0.05 mm (0.002 inch).
NOTE: Support the countershaft at both ends as shown.
3. Rotate two complete revolutions. If the runout exceeds the service limit, replace the countershaft with a new one.
ASSEMBLE
1. Install the thrust shim, needle bearing, 1st gear, friction damper, synchro ring, and synchro spring.